Energy rising. Output falling. The gap is worker negligence — machines idle, lines dark, power burning every shift. Technurah makes that gap visible, measurable, and fixable in real time with IoT intelligence.
In most garment and textile factories, managers have no way to see what's happening at the machine level — until the monthly bill arrives. By then, the damage is done.
Sewing lines left powered on during breaks, lunch, and handover. Each idle line consumes full standby power — multiplied by dozens of lines across a shift.
Output drops by 30–40% during certain shifts or under specific supervisors — but without per-minute data, management only sees the end-of-day report when it's too late.
Lights, HVAC, compressors, and auxiliary equipment running overnight or on weekends. A single overlooked switch can cost thousands in a month.
Clip-on IoT energy meters attach to each machine, line, and circuit panel in under 2 hours — no wiring, no shutdown required. ESP32 nodes go live instantly over MQTT.
Technurah pulls energy data (kW per minute) alongside production counts for every line, every shift, every worker — giving you the energy-to-output ratio that matters.
The moment a line consumes power without producing output, managers receive an alert with the exact line, time, and energy wasted — enabling immediate corrective action.
Every feature is designed around one goal: making worker and machine accountability automatic, real-time, and undeniable.
Monitor energy consumption for every individual machine and production line at 60-second resolution over MQTT. Spot idle draw, abnormal spikes, and wasteful patterns the moment they occur.
The critical metric nobody currently measures: energy consumed per garment produced, per line, per shift, per supervisor. Instantly identify which lines are costing you the most per unit.
Automatic alerts the instant a machine is running but producing nothing. Get notified via dashboard, email, or WhatsApp — with line number, duration, and estimated energy cost wasted.
Auto-generated reports for every shift: which supervisor was on duty, which lines underperformed, how much energy was wasted versus production achieved. Perfect for daily management reviews.
Machine learning models learn your factory's normal patterns and automatically flag deviations — catching slow negligence trends before they become chronic, costly problems.
Full factory visibility from your phone — live energy, live output, active alerts, and shift summaries. Walk the floor with data, not assumptions. Available 24/7 from anywhere.
When energy goes up and production goes down — Technurah shows you exactly which line, which shift, and by how much.
Technurah is built for the reality of floor-level manufacturing — fast-moving, shift-based, and too often unmonitored.
Track sewing lines, cutting sections, and finishing floors. Know the energy cost per dozen garments, flag idle lines during breaks, and hold each shift supervisor accountable with hard data.
Monitor spinning machines, looms, and dyeing vats continuously. Detect off-spec energy spikes that indicate mechanical issues or operator errors before they escalate into costly breakdowns.
Assembly lines, packaging stations, and production cells — track energy versus throughput at every station. Identify bottlenecks and underperforming teams before end-of-shift reports.
High-energy processes with precise timing requirements. Technurah tracks steam, water heating, and chemical dosing energy per batch — linking cost directly to output quality and volume.
The moment a worker leaves a machine running unattended, Technurah flags it. Managers get an alert with line number, duration, and estimated taka wasted — before the shift ends.
For the first time, management has objective, data-backed performance comparison across all shifts — removing guesswork, favouritism, and end-of-day surprises from floor management.
Most factories waste 25–40% of their energy on idle machines, unnecessary standby, and after-hours consumption. Technurah identifies every source automatically and tracks the savings.
Non-invasive IoT clamp meters install on live circuits in hours — no production stoppage, no electrician downtime. You're live and seeing data the same day.
"Within the first week, Technurah showed us that 6 sewing lines were running for 45 minutes after each shift with no workers present. We fixed it immediately and cut our energy bill by 22%."
"Before Technurah, I had no idea which shift was performing poorly. Now I have a daily IoT report showing energy per dozen by shift — and my supervisors know exactly what they're accountable for."
"We have 14 production lines. Technurah told us that Line 9 was consuming 34% more energy than similar lines. Turned out the machine needed maintenance. Fixed in a day, saved us months of waste."
Book a free 30-minute demo. We'll show you — using your factory's type and size — exactly how much energy and production you're losing right now, and how Technurah stops it.
Message us directly and get a response within minutes. Share your factory details and we'll tailor the demo to your needs.
+880 1740-999768Send us your factory details — type, number of lines, shifts per day — and we'll prepare a customised savings estimate for your facility.
technurah@gmail.comSchedule a 30-minute screen-share session. We'll show Technurah running on a real factory — live IoT data, live alerts, and the exact reports managers use daily.
Schedule via WhatsApp